Maxi Scoots

Bike Maintenance/Questions => Piaggio => Topic started by: SomersetAndyX10 on July 10, 2020, 12:19:11 PM



Title: Blowing a fuse....
Post by: SomersetAndyX10 on July 10, 2020, 12:19:11 PM
My Piaggio X10 has started to have an electrical problem.
When I turn on the ignition, the bike goes through the normal sequence, with the screen
lighting up and the fuel and temp guages come on. When I pull in the brake lever to start the engine, it
 blows a fuse and the digital screen goes blank and I am unable to start the engine.
The fuse that blows is the 7.5amp fuse which runs the indicators and the start up.
I have changed all the relays and taken off the handlebar cover but it seems okay.

Has anyone had a similar problem?  and if so how did you cure it..

I love my X10, and this is the only problem I have had..

Thanks Andy


Title: Re: Blowing a fuse....
Post by: Expat47 on July 10, 2020, 06:14:15 PM
No, that wasn't my problem and I was the only X10 owner around here. That's not to say that some of these other guys haven't got the answer.